Pfisterer Fuse Switch Disconnects for LV Overhead Lines
For up to 160 A and 400 A in-line fused switching and for 16 A tap off connections
- Size 00 and Size 2 for up to 160 A and 400 A
- Brackets for single and triple pole mounting
- Tap off fuse connectors for 2-16 A
The DIN standard fuse switch disconnects for low voltage, from our brand partner Pfisterer, are designed for bare wire or ABC overhead line sectionalising applications.
The fuse switch disconnect housings are manufactured from weatherproof UV and ageing resistant reinforced polymer.
Contacts are tin plated copper (DIN00) or silver plated copper (DIN1/2). Terminals are fully insulated and made from high grade aluminium alloy, suitable for use with either aluminium or copper conductors on either side.
Both the DIN00 and DIN1/2 size fuse switch disconnects can be mounted on poles, crossarms or other structures. Mounting brackets are available for single and triple pole plus neutral configuration. Brackets can be fabricated or modified to suit individual requirements.
The 16 A fuse protected tap-off is also fully insulated and can be used on ABC systems using an insulation piercing conductor and on bare overhead conductors, if the terminal bolt is stripped.
Fuse Switch Disconnects & Tap-off Connectors
Hiko Code | Package Qty | Description | Rated Operation Current | Fuse Size | Mounting Bolts | Dimensions (mm) | ||
Length | Width | Height2 | ||||||
KP2207R | 1 | Single pole fuse switch disconnect | 160 A1 | DIN 00 | 1x M8 | 207 | 65 | 106 |
KP2209 | 1 | Single pole fuse switch disconnect | 400 A | DIN 1/2 | 2x M83 | 345 | 100 | 140 |
KP2202 | 25 | Tap-off fuse connector4 | 2-16 A | NEOZED D01 | – | – | – | – |
Fuse Switch Disconnect Technical Data
Hiko Code | In Terminal | Out Terminal | Rated Short Circuit Making Capacity kA | Rated Short Circuit Withstand Current kA | Protection Class | Utilisation Category | ||
Type | Conductor Size mm2 | Type | Conductor Size mm2 | |||||
KP2207R | Single tunnel | 6 – 95 | Double tunnel | 2 x 6 – 95 | 16 | 16 | IP23 | AC21B |
KP2209 | 25 – 240 | 2 x 25 – 240 | ||||||
Notes
- Current rating 245 A with solid links
- Nominal, excluding mounting bolts and pulling handle
- Distance between centre lines 60mm
- For branch conductor 1.5-6mm2
Hiko Code | Package Qty | Description | Material | Mounting Holes | |||
Size (mm) | Distance between centres (mm) | ||||||
WEB002004 | 1 | Slotted angle bracket for 1x KP2207R | 2 mm stainless steel 304 | 9 x 20 | – | ||
WEB002014 | 1 | Two-hole angle bracket for 1x KP2207R | 6 mm hot dip galvanised steel | 2x Ø14 | 55 | ||
KP2213 | 1 | Angle bracket for 3x KP2209 | 2x Ø18 | 220 | |||
Figure 1 – Slotted angle bracket |
Figure 2 – Two-hole angle bracket |
Figure 3 – Angle bracket | |||||
Other literature available on request
Reports, drawings, technical data sheets, installation instructions, O&M guidelines
